STUDY A DOUBLE-FACED PERCUSSION SYSTEM IN THE SOLIDWORKS SIMULATION

Authors

  • Leonid Kostiantynovych Listovshchyk Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського», Ukraine https://orcid.org/0000-0003-3413-1802

DOI:

https://doi.org/10.20535/1813-5420.3.2014.126536

Keywords:

impact, power pulse system, SolidWorks Simulation, stress, deformation

Abstract

In this article is present mathematical model of a double-faced system, one head of this system is controlled, and the second is inertial. The condition of effective use of the system in terms of the most complete transfer of the strain energy in the rock. The magnitude of deformations and stresses in the elements of shock systems allow to draw conclusions about the rational choice of speed and mass parameters of the shock system, pick material of heads and significantly reduce material and time costs for simulation and testing.

References

Сліденко В.М. Моделювання функціонування імпульсного виконавчого органа маніпулятора / Сліденко В.М., Шевчук С.П., Лістовщик Л.К., Бокало В.Я. // Вісник Кременчуцького державного політехнічного університету імені Михайла Остроградського. – Кременчук: КДПУ, 2008. – Вип. 3/2009 (56) частина 2. С. 135 – 137.

Лістовщик Л.К. Обгрунтування параметрів двобойкового гідромолотка для руйнування гірських порід / Л.К. Лістовщик // Вісник Криворізького технічного університету: Збірник наукових праць. – 2011. – Вип. 27. – С. 255 – 258.

Алямовский А.А. Инженерные расчеты в SolidWorks Simulation. M.: ДMK Пресс, 2011. 464 с.